Preparation: Clean the leather surface with Angelus
Leather Preparer using applicators, cotton balls, or a rag. Ensure the surface
is free of dirt and oils.

Drying: Allow the leather to dry for a few minutes,
then wipe with a microfiber towel to remove lint.

Painting: Apply 3-5 thin layers of Angelus Paint,
waiting 15-30 minutes between layers. Ensure each layer is dry before applying
the next.

Curing: Let the paint cure for 24-48 hours. Protect
from lint and debris for a smooth finish.

Finishing: For extra protection or to adjust sheen,
apply 1-2 layers of Angelus 4-Coat Clear Coat.

Preparation: Clean the surface with Angelus Easy
Cleaner Kit to remove oils and dirt.

Drying: Ensure the surface is completely dry and free
of cleaner residue.

Optional Softening: Mix Angelus 2-Soft with paint for
a softer finish. This helps the paint soak into the fabric, reducing a screen
print-like texture.

Painting: Apply 3-5 thin layers of Angelus Paint,
allowing 15-30 minutes drying time between coats.

Finishing: If desired, use Angelus 4-Coat Clear Coat
to adjust sheen.

Preparation: Clean the surface with Angelus Leather
Preparer. Sand with high-grit sandpaper (800, 1500 grit) for better adhesion.

Adhesion Promoter: Apply an adhesion promoter if
needed to enhance paint absorption.

Painting: Use an airbrush for smooth finishes. Apply 3-5
thin layers of Angelus Paint, waiting 15-30 minutes between coats.

Finishing: Apply Angelus 4-Coat High Gloss to restore
shine.

Always test paint on a small, inconspicuous area first.

Use thin coats to prevent cracking and ensure durability.

Allow adequate drying time between layers for optimal
results.

By following these steps and tips, you can achieve vibrant,
long-lasting finishes on various surfaces with Angelus Paint.